NegateOperation
A NegateOperation is the result of a part that has been negated through Studio's solid modeling Negate tool.
A negated part turns pink and translucent as an indicator of its state. If the negated part is then unioned with a normal part using the Union tool, sections where the negated part overlaps the normal part will be cut out.
Note that you can undo part negation by selecting the negated part and clicking Negate again.
See Solid Modeling to learn more about Studio's solid modeling tools and methods.
Resumen
Propiedades
Propiedades heredados de PartOperation- Leer paralelo
The level of detail used to render the solid modeled part.
- Leer paralelo
An angle in degrees which affects the smooth shading of a solid modeled part.
- Solo lecturaNo replicadoLeer paralelo
The number of polygons in this solid model.
- Leer paralelo
Sets whether the PartOperation can be recolored using inherited color properties.
- No replicadoLeer paralelo
Determines the level of detail the part's physics will adhere to its mesh.
- No replicadoLeer paralelo
Determines the geometric representation used to compute aerodynamic forces and torques.
Determines whether a part is immovable by physics.
- No replicadoLeer paralelo
The angular velocity of the part's assembly.
- Solo lecturaNo replicadoLeer paralelo
The center of mass of the part's assembly in world space.
- No replicadoLeer paralelo
The linear velocity of the part's assembly.
- Solo lecturaNo replicadoLeer paralelo
The total mass of the part's assembly.
- Solo lecturaNo replicadoLeer paralelo
A reference to the root part of the assembly.
- Leer paralelo
Determines the type of surface for the Back face of a part (+Z direction).
- Leer paralelo
Determines the type of surface for the Bottom face of a part (-Y direction).
- No replicadoLeer paralelo
Determines the color of a part.
Determines the position and orientation of the BasePart in the world.
- Leer paralelo
Determines whether a part may collide with other parts.
Determines whether the part is considered during spatial query operations.
Determines if Touched and TouchEnded events fire on the part.
- Leer paralelo
Determines whether or not a part casts a shadow.
- Solo lecturaNo replicadoLeer paralelo
Describes the world position in which a part's center of mass is located.
- No replicadoLeer paralelo
Describes the name of a part's collision group.
Determines the color of a part.
- Solo lecturaNo replicadoLeer paralelo
Indicates the current physical properties of the part.
- Leer paralelo
Determines several physical properties of a part.
- Leer paralelo
Used to enable or disable aerodynamic forces on parts and assemblies.
- Solo lecturaNo replicadoLeer paralelo
- Solo lecturaNo replicadoLeer paralelo
The actual physical size of the BasePart as regarded by the physics engine.
- Leer paralelo
Determines the type of surface for the Front face of a part (-Z direction).
- Leer paralelo
Determines the type of surface for the Left face of a part (-X direction).
- OcultoNo replicadoLeer paralelo
Determines a multiplier for BasePart.Transparency that is only visible to the local client.
Determines whether a part is selectable in Studio.
Describes the mass of the part, the product of its density and volume.
Determines whether the part contributes to the total mass or inertia of its rigid body.
- Leer paralelo
Determines the texture and default physical properties of a part.
- No replicadoLeer paralelo
The name of MaterialVariant.
- OcultoNo replicadoLeer paralelo
Describes the rotation of the part in the world.
- Leer paralelo
Specifies the offset of the part's pivot from its CFrame.
Describes the position of the part in the world.
- OcultoSolo lecturaNo replicadoLeer paralelo
Time since last recorded physics update.
- Leer paralelo
Determines how much a part reflects the skybox.
- Solo lecturaNo replicadoLeer paralelo
Describes the smallest change in size allowable by the Resize method.
- Solo lecturaNo replicadoLeer paralelo
Describes the faces on which a part may be resized.
- Leer paralelo
Determines the type of surface for the Right face of a part (+X direction).
- Leer paralelo
The main rule in determining the root part of an assembly.
The rotation of the part in degrees for the three axes.
Determines the dimensions of a part (length, width, height).
- Leer paralelo
Determines the type of surface for the Top face of a part (+Y direction).
- Leer paralelo
Determines how much a part can be seen through (the inverse of part opacity).
- No replicadoNo programableLeer paralelo
Métodos
Métodos heredados de PartOperationSubstitutes the geometry of this PartOperation with the geometry of another PartOperation.
Apply an angular impulse to the assembly.
Apply an impulse to the assembly at the assembly's center of mass.
Apply an impulse to the assembly at specified position.
- Escribir paralelo
Returns whether the parts can collide with each other.
Checks whether you can set a part's network ownership.
- Escribir paralelo
Returns a table of parts connected to the object by any kind of rigid joint.
Return all Joints or Constraints that is connected to this Part.
Returns the value of the Mass property.
- Escribir paralelo
Returns the current player who is the network owner of this part, or nil in case of the server.
- Escribir paralelo
Returns true if the game engine automatically decides the network owner for this part.
- Escribir paralelo
Returns the base part of an assembly of parts.
Returns a table of all BasePart.CanCollide true parts that intersect with this part.
- Escribir paralelo
Returns the linear velocity of the part's assembly at the given position relative to this part.
- Escribir paralelo
Returns true if the object is connected to a part that will hold it in place (eg an BasePart.Anchored part), otherwise returns false.
Changes the size of an object just like using the Studio resize tool.
Sets the given player as network owner for this and all connected parts.
Lets the game engine dynamically decide who will handle the part's physics (one of the clients or the server).
- IntersectAsync(parts : Objects,collisionfidelity : Enum.CollisionFidelity,renderFidelity : Enum.RenderFidelity):InstanceProporciona
Creates a new IntersectOperation from the overlapping geometry of the part and the other parts in the given array.
- SubtractAsync(parts : Objects,collisionfidelity : Enum.CollisionFidelity,renderFidelity : Enum.RenderFidelity):InstanceProporciona
Creates a new UnionOperation from the part, minus the geometry occupied by the parts in the given array.
- UnionAsync(parts : Objects,collisionfidelity : Enum.CollisionFidelity,renderFidelity : Enum.RenderFidelity):InstanceProporciona
Creates a new UnionOperation from the part, plus the geometry occupied by the parts in the given array.
Gets the pivot of a PVInstance.
Transforms the PVInstance along with all of its descendant PVInstances such that the pivot is now located at the specified CFrame.
Eventos
Eventos heredados de BasePartFires when a part stops touching another part as a result of physical movement.
Fires when a part touches another part as a result of physical movement.