HumanoidDescription

Show Deprecated

HumanoidDescription is an object that stores a description of a Humanoid for R6 and R15 rigs. It can be applied in order to set a rig's scaling, clothing (Shirt, Pants, ShirtGraphic), Accessories, Animations and BodyColors.

You can get a HumanoidDescription by using the following functions:

See also:

Summary

Properties

Methods

Events

Properties

AccessoryBlob

Not Replicated
Not Scriptable
Read Parallel

A JSON formatted array of Layered clothing where each table in the entry in the array describes an accessory's AssetId, AccessoryType, Order, and (optionally) Puffiness as key-value pairs. This can be edited in the properties windows for the HumanoidDescription.

To make changes from Lua (which is recommended over editing the JSON directly), use HumanoidDescription:SetAccessories() and HumanoidDescription:GetAccessories(). These methods can also be enabled to work with rigid accessories by setting IncludeRigidAccessories parameters to true.

BackAccessory

Not Replicated
Read Parallel

BackAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied. The list cannot contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

BodyTypeScale

Read Parallel

BodyTypeScale determines the factor by which the shape of a Humanoid is interpolated from the standard R15 body shape (0) to a taller and more slender body type (1). Values outside the range of 0 to 1 are clamped. When the description is applied through Humanoid:ApplyDescription(), this value maps to a BodyTypeScale NumberValue within the Humanoid.

Note that when the value of this property is 0, the ProportionScale property has no effect.

See Also

ClimbAnimation

Read Parallel

When this description is applied to a Humanoid, ClimbAnimation determines the Animation.AnimationId to play when its state is Climbing.

See also:

DepthScale

Read Parallel

DepthScale determines by what factor the depth (back-to-front distance) of a Humanoid is scaled, as well as all accessories not attached to its head. When the description is applied through Humanoid:ApplyDescription(), this value maps to a BodyDepthScale NumberValue within the Humanoid.

See Also

Face

Read Parallel

Face determines the asset ID of the Face to be applied to a Humanoid. The type of the asset ID provided must be for a Face type asset and not a Decal or Image type asset.

The actual face texture is rendered using a Decal in the Head named "face" or "Face".

See also:

FaceAccessory

Not Replicated
Read Parallel

FaceAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to the front of its face (such as glasses). The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

FallAnimation

Read Parallel

When this description is applied to a Humanoid, FallAnimation determines the Animation.AnimationId to play when its state is Freefall.

See also:

FrontAccessory

Not Replicated
Read Parallel

FrontAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to front of its torso (such as medals or ties). The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

GraphicTShirt

Read Parallel

GraphicTShirt determines the Graphic used by a ShirtGraphic instance when Humanoid:ApplyDescription() is called on a Humanoid. The asset type must be for a T‑Shirt, not a Decal or Image.

See Also

HairAccessory

Not Replicated
Read Parallel

HairAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to its head resembling hair. The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

HatAccessory

Not Replicated
Read Parallel

HatAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to its head. The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

Not Replicated
Read Parallel

Head determines the asset ID of the Head to be applied to a Humanoid.

See also:

HeadColor

Not Replicated
Read Parallel

HeadColor determines the BodyColors.HeadColor3 and BodyColors.HeadColor of a Humanoid when the description is applied.

See also:

HeadScale

Read Parallel

HeadScale determines by what factor the Head object of a Humanoid is scaled, as well as any accessories attached to it (such as those specified by HatAccessory and HairAccessory). When the description is applied through Humanoid:ApplyDescription(), this value maps to a HeadScale NumberValue within the Humanoid.

See Also

HeightScale

Read Parallel

HeightScale determines by what factor the height (top-to-bottom distance) of a Humanoid is scaled, as well as all accessories not attached to its head. When the description is applied through Humanoid:ApplyDescription(), this value maps to a BodyHeightScale NumberValue within the Humanoid.

See Also

IdleAnimation

Read Parallel

When this description is applied to a Humanoid, IdleAnimation determines the Animation.AnimationId to play when its state is Running at a speed near zero.

See also:

JumpAnimation

Read Parallel

When this description is applied to a Humanoid, JumpAnimation determines the Animation.AnimationId to play when its state is Jumping.

See also:

LeftArm

Not Replicated
Read Parallel

LeftArm determines the asset ID of the LeftArm to be applied to a Humanoid.

See also:

LeftArmColor

Not Replicated
Read Parallel

LeftArmColor determines the BodyColors.LeftArmColor3 and BodyColors.LeftArmColor of a Humanoid when the description is applied. For R15 and Rthro rigs, this property controls both the upper, lower, and hand parts of the left arm.

See also:

LeftLeg

Not Replicated
Read Parallel

LeftLeg determines the asset ID of the LeftLeg to be applied to a Humanoid.

See also:

LeftLegColor

Not Replicated
Read Parallel

LeftLegColor determines the BodyColors.LeftLegColor3 and BodyColors.LeftLegColor of a Humanoid when the description is applied. For R15 and Rthro rigs, this property controls both the upper, lower, and foot parts of the left leg.

See also:

MoodAnimation

Read Parallel

NeckAccessory

Not Replicated
Read Parallel

NeckAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to its neck (such as scarves or necklaces). The list does not contain duplicates.

Any accessory can used in this property, even if it is meant to go in a different accessory spot. For example, an accessory meant to go on your back (such as a cape) could be included in HairAccessory. An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

Pants

Read Parallel

Pants determines the PantsTemplate used by a Pants instance when Humanoid:ApplyDescription() is called on a Humanoid. The asset type must be for Pants, not a Decal or Image.

See Also

ProportionScale

Read Parallel

ProportionScale determines how wide (0) or narrow (1) a Humanoid rig is. Values outside the range of 0 to 1 are clamped. When the description is applied through Humanoid:ApplyDescription(), this value maps to a BodyProportionScale NumberValue within the Humanoid.

Note that when the value of BodyTypeScale is 0, this property has no effect.

See Also

RightArm

Not Replicated
Read Parallel

RightArm determines the asset ID of the RightArm to be applied to a Humanoid.

See also:

RightArmColor

Not Replicated
Read Parallel

RightArmColor determines the BodyColors.RightArmColor3 and BodyColors.RightArmColor of a Humanoid when the description is applied. For R15 and Rthro rigs, this property controls both the upper, lower, and hand parts of the right arm.

See also:

RightLeg

Not Replicated
Read Parallel

RightLeg determines the asset ID of the RightLeg to be applied to a Humanoid.

See also:

RightLegColor

Not Replicated
Read Parallel

RightLegColor determines the BodyColors.RightLegColor3 and BodyColors.RightLegColor of a Humanoid when the description is applied. For R15 and Rthro rigs, this property controls both the upper, lower, and foot parts of the right leg.

See also:

RunAnimation

Read Parallel

When this description is applied to a Humanoid, RunAnimation determines the Animation.AnimationId to play when its state is Running at a moderate speed.

See also:

Shirt

Read Parallel

Shirt determines the ShirtTemplate used by a Shirt instance when Humanoid:ApplyDescription() is called on a Humanoid. The asset type must be for Shirt, not a Decal or Image.

See Also

ShouldersAccessory

Not Replicated
Read Parallel

ShouldersAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to its shoulders (such as shoulder-mounted critters). The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

SwimAnimation

Read Parallel

When this description is applied to a Humanoid, SwimAnimation determines the Animation.AnimationId to play when its state is Swimming

See also:

Torso

Not Replicated
Read Parallel

Torso determines the asset ID of the Torso to be applied to a Humanoid.

See also:

TorsoColor

Not Replicated
Read Parallel

TorsoColor determines the BodyColors.TorsoColor3 and BodyColors.TorsoColor of a Humanoid when the description is applied. For R15 and Rthro rigs, this property controls both the upper and lower parts of the torso.

See also:

WaistAccessory

Not Replicated
Read Parallel

WaistAccessory is a comma-separated list of asset IDs that determine what accessories should be added when the description is applied, usually those attached to its waist (such as belts). The list does not contain duplicates.

An error is thrown if you try to apply a new description which shares any assets with the existing description but a different accessory property.

See also:

WalkAnimation

Read Parallel

When this description is applied to a Humanoid, WalkAnimation determines the Animation.AnimationId to play when its state is Running at a low speed

See also:

WidthScale

Read Parallel

WidthScale determines by what factor the width (left-to-right distance) of a Humanoid is scaled, as well as all accessories not attached to its head. When the description is applied through Humanoid:ApplyDescription(), this value maps to a BodyWidthScale NumberValue within the Humanoid.

See Also

Methods

AddEmote

void

AddEmote will add an Emote asset to the description given a name and its asset ID. The asset ID must be for an "Emote" asset (see Featured emotes in the Catalog).

You can add multiple emotes of the same name. All emotes of the same name can be removed using RemoveEmote. If an emote with the same ID is added under the same name, EmotesChanged fires.

See also:

Parameters

name: string

A string that identifies what emote is being added. Example: "Salute".

assetId: number

An emote asset ID.


Returns

void

GetAccessories

Returns a table of an avatar's current accessories. If the second parameter (includeRigidAccessories) is true then the returned table will also include entries for rigid accessories from the rigid accessory properties.

Parameters

includeRigidAccessories: bool

Set to true if rigid accessories from the rigid accessory properties should also be included in the return array. False means only include layered clothing accessories from the AccessoryBlob.


Returns

Returns an array where each entry specifies for an individual accessory the AccessoryType, AssetId, IsLayered, Order and Puffiness.

Code Samples

Get Accessories

local includeRigidAccessories = true
local accessoriesTable = game:GetService("Players"):GetHumanoidDescriptionFromUserId(1):GetAccessories(includeRigidAccessories)
for _, accessoryInfo in ipairs(accessoriesTable) do
print(tostring(accessoryInfo.AssetId) .. " " .. tostring(accessoryInfo.AccessoryType))
end

GetEmotes

GetEmotes returns a dictionary of emotes that have been added or set to this description. The keys of this dictionary are the names of the emotes, and the values are a non-empty array of emote IDs for that name.

Example


local hd = Instance.new("HumanoidDescription")
hd:AddEmote("Salute", 3360689775)
local emotes = hd:GetEmotes()
for name, ids in emotes do
print(("The emote %s has %d ids:"):format(name, #ids))
for _, id in ids do
print(id)
end
end

See also:


Returns

A dictionary of emotes where the key is the emote name and the value is an array of emote asset IDs. Example:


{
Salute = {3360689775},
Agree = {4849487550},
Disagree = {4849495710}
}

.

GetEquippedEmotes

GetEquippedEmotes returns an array of tables which indicate the Name and Slot of each equipped emote as it was set by SetEquippedEmotes.

Example


local hd = Instance.new("HumanoidDescription")
hd:SetEmotes({Salute = {3360689775}, Agree = {4849487550}})
hd:SetEquippedEmotes({"Salute", "Agree"})
-- Iterate over the equipped emotes:
for _, t in hd:GetEquippedEmotes() do
print(("In slot %d: emote %s is equipped"):format(t.Slot, t.Name))
end

See also:


Returns

An array of tables describing the name and slot which each emote is equipped. Example:


{
{Slot = 3, Name = "Salute"},
{Slot = 2, Name = "Agree"},
{Slot = 1, Name = "Disagree"},
}

.

RemoveEmote

void

RemoveEmote removes all emotes from the description that have been added or set under the given name. If there are no added emotes with the given name, no error is thrown and EmotesChanged does not fire.

See also:

Parameters

name: string

The name of the emote as it was set or added.


Returns

void

SetAccessories

void

Accepts a table that sets the accessories and related properties for an avatar. If the second parameter (includeRigidAccessories) is true, then this function can also be used to set the rigid accessories in the rigid accessory properties. In this case any table entry that does not have an Order will be considered a rigid accessory and put in the appropriate property according to the AccessoryType.

Parameters

accessories: Array

Each entry specifies for an individual accessory the AccessoryType, AssetId, IsLayered, Order and Puffiness.

includeRigidAccessories: bool

Set to true if rigid accessories are also included in the passed in array (they would have to not specify Order).


Returns

void

Code Samples

Set Accessories

local humanoidDescription = Instance.new("HumanoidDescription")
local originalSpecifications = {
{
Order = 1,
AssetId = 123456789,
Puffiness = 0.5,
AccessoryType = Enum.AccessoryType.Sweater
}
}
humanoidDescription:SetAccessories(originalSpecifications)
local updatedSpecifications = humanoidDescription:GetAccessories(false)
local newIndividualSpecification = {
Order = 2,
AssetId = 987654321,
Puffiness= 0.7,
AccessoryType = Enum.AccessoryType.Jacket,
IsLayered = true
}
updatedSpecifications[#updatedSpecifications + 1] = newIndividualSpecification
humanoidDescription:SetAccessories(updatedSpecifications)

SetEmotes

void

SetEmotes sets all of the emotes on this description given a table similar to that returned by GetEmotes. It fires EmotesChanged

Example


local emotes = {
Salute = {3360689775}, -- Syntax note: can also use ["Salute"] = ...
Agree = {4849487550},
Disagree = {4849495710}
}
local hd = Instance.new("HumanoidDescription")
hd:SetEmotes(emotes)

See also:

Parameters

emotes: Dictionary

A dictionary of emotes where the key is the emote name and the value is an array of emote asset IDs. Example:


{
Salute = {3360689775},
Agree = {4849487550},
Disagree = {4849495710}
}

.


Returns

void

SetEquippedEmotes

void

SetEquippedEmotes sets the currently equipped emotes given an array of emote names as they were passed to AddEmote or SetEmotes. It can also take an array of tables similar to that returned by GetEquippedEmotes. Calling this function fires EquippedEmotesChanged.

Example


local hd = Instance.new("HumanoidDescription")
hd:SetEmotes({Salute = {3360689775}, Agree = {4849487550}})
-- Can provide either an array of strings... (index is slot number)
hd:SetEquippedEmotes({"Salute", "Agree"})
-- ...or an array of tables as returned by GetEquippedEmotes (Slot and Name keys set)
hd:SetEquippedEmotes({{Slot = 1, Name = "Salute"}, {Slot = 2, Name = "Agree"}})

See also:

Parameters

equippedEmotes: Array

An array of emote names. Example:


{ "Disagree", "Agree", "Salute" }

– OR – An array of tables describing the name and slot which each emote is equipped. Example:


{
{Slot = 3, Name = "Salute"},
{Slot = 2, Name = "Agree"},
{Slot = 1, Name = "Disagree"},
}

.


Returns

void

Events

EmotesChanged

EmotesChanged fires when emotes are added, removed or set on the description. The event fires with the new emote table as returned by GetEmotes.

If AddEmote is called with the same name and ID as an existing emote, this event fires.

See also:

Parameters

newEmotes: Dictionary

A dictionary of emotes where the key is the emote name and the value is an array of emote asset IDs. Example:


{
Salute = {3360689775},
Agree = {4849487550},
Disagree = {4849495710}
}

.


EquippedEmotesChanged

EquippedEmotesChanged fires when the equipped emotes are set on this description using SetEquippedEmotes. It provides the new equipped emotes in a table like that returned by GetEquippedEmotes.

Example


local hd = Instance.new("HumanoidDescription")
hd.EquippedEmotesChanged:Connect(function(equippedEmotes)
print(("We have %d emotes equipped"):format(#equippedEmotes))
for _, t in equippedEmotes do
print(("In slot %d: emote %s is equipped"):format(t.Slot, t.Name))
end
end)
hd:SetEquippedEmotes({"Salute", "Agree"}) --> We have 2 emotes equipped

See also:

Parameters

newEquippedEmotes: Array

An array of tables describing the name and slot which each emote is equipped. Example:


{
{Slot = 3, Name = "Salute"},
{Slot = 2, Name = "Agree"},
{Slot = 1, Name = "Disagree"},
}

.