This code sample includes a demonstration of how a `CylinderMesh` can be used,
and how it scales so as to maintain a constant ratio of length to width.


The CylinderMesh object applies a 'cylinder' mesh to the `Class.BasePart` it
is parented to.

## What does a CylinderMesh do?

A CylinderMesh gives the `Class.BasePart` it was applied to a cylinder shaped
mesh.

The mesh applied gives the same appearance as that due to the
`Class.SpecialMesh.MeshType` of a `Class.SpecialMesh` being set to 'Cylinder'
or `Class.Part.Shape` being set to 'Cylinder'. However, unlike those two
cases, it is orientated so that the height of the cylinder is along the
`Class.BasePart` Y axis.

The dimensions of the mesh scale relative to the `Class.BasePart.Size` of the
`Class.BasePart`. This scale is uniformly along the `Class.BasePart` Y axis
and maintaining a 1:1 ratio for the part's X and Z axis, using the lowest
value. This means the `Class.BasePart` can be resized normally, but the cross
section of the cylinder will always remain a circle and cannot be stretched or
compressed.

Note as the CylinderMesh object does not include a texture the
`Class.DataModelMesh.VertexColor` property does not do anything.

## Why use a CylinderMesh?

The advantage of using a mesh over setting the `Class.Part.Shape` property of
a part to 'Cylinder' is that the `Class.DataModelMesh.Scale` and
`Class.DataModelMesh.Offset` properties are exposed. These allow the position
and dimensions of the mesh that is displayed to be changed without changing
the `Class.BasePart.Position` or `Class.BasePart.Size` of the `Class.Part` the
mesh is parented to.

The key difference between a CylinderMesh or a `Class.SpecialMesh` with
`Class.SpecialMesh.MeshType` set to 'Cylinder' is the orientation of the
cylinder mesh. With a CylinderMesh, the height of the cylinder is aligned with
the height (Y axis) of the part. With a `Class.SpecialMesh` (or `Class.Part`
with `Class.Part.Shape` set to 'Cylinder'), the height of the cylinder is
aligned with the X axis.


CylinderMesh

The CylinderMesh object applies a 'cylinder' mesh to the `Class.BasePart` it
is parented to.


BevelMesh is an abstract class that `Class.BlockMesh` and `Class.CylinderMesh`
inherit from.


BevelMesh

An abstract class that `Class.BlockMesh` and `Class.CylinderMesh` inherit
from.


The DataModelMesh is an abstract class from which mesh classes descend.

Mesh classes are objects that, when parented to `Class.BasePart|BaseParts`
alter the appearance of the part to that of a predefined mesh. Note, they only
alter the appearance of the part and not the physics/collision boundaries of
the part. Developers looking to apply a mesh to a part that alters the part's
collision should use `Class.MeshPart|MeshParts`.

Note the `Class.MeshPart` and `Class.CharacterMesh` classes do not descend
from DataModelMesh.


DataModelMesh

In this code sample a `BasePart` is instanced with a `SpecialMesh`. The
`Class.DataModelMesh.Scale` and `Class.DataModelMesh.Offset` properties of the
`SpecialMesh` are then animated using `TweenService`.


The Offset of a mesh determines the distance from the
`Class.BasePart.Position` of a `Class.BasePart` that the mesh will be
displayed.

#### How to use mesh offset

The Offset property changes the relative position the mesh will be
rendered at. For example, an offset of 0, 5, 0 will cause the mesh to be
displayed 5 studs above the position of the `Class.BasePart`.

The position of the `Class.BasePart` remains unchanged, meaning the
physics collision box of the part will remain in the same location. This
is demonstrated in the image below where the green outline (a
`Class.SelectionBox`) shows the extents of the `Class.BasePart`.

#### Other uses for mesh offset

There are a number of interesting uses for the mesh offset property.

- Offset and `Class.DataModelMesh.Scale` can be animated using
  `Class.TweenService` relatively inexpensively as the engine does not
  need to make any physics/collision calculations as the `Class.BasePart`
  is not moved.
- Changing the relationship between the mesh and its collision extents
  (determined by the `Class.BasePart`)


DataModelMesh.Offset

The Offset of a mesh determines the relative position from the
`Class.BasePart.Position` of a `Class.BasePart` that the mesh will be
displayed at.


The Scale of a mesh determines the size of the mesh relative to its
original dimensions.

#### How to use mesh scale

The scale property works slightly differently depending on the type of
mesh being used. Note the size of the `Class.BasePart` remains unchanged,
meaning the physics collision box of the part will remain the same.

- `Class.SpecialMesh` objects with `Class.SpecialMesh.FileType` set to
  'FileMesh' scale relative to the original dimensions of the mesh when it
  was uploaded to Roblox
- `Class.BlockMesh` objects or `Class.SpecialMesh` objects with
  `Class.SpecialMesh.FileType` set to 'Brick', 'Wedge' or 'Sphere' scale
  uniformly relative to the `Class.BasePart.Size` of their parent
- `Class.CylinderMesh` objects or `Class.SpecialMesh` objects with
  `Class.SpecialMesh.FileType` set to 'Cylinder' scale relative to the
  `Class.BasePart.Size` of their parent. Uniformly for the cylinders
  height axis and maintaining a 1:1 ratio for the length and width of the
  cylinder, using the lowest value.
- `Class.SpecialMesh` objects with `Class.SpecialMesh.FileType` set to
  'Head' currently scale in a non standard manner. Developers should not
  rely on this as there are plans to change this behavior.
- `Class.SpecialMesh` objects with `Class.SpecialMesh.FileType` set to
  'Torso' scale in a non standard manner. Developers should not rely on
  this as there are plans to deprecate this mesh type.

#### Mesh scale demonstration

The above behavior can be seen in the following demonstration images.

Linear scaling relative to part size for 'Brick', 'Wedge' and 'Sphere'
meshes.

Linear scaling relative to original uploaded mesh for 'FileMesh' meshes

Non-uniform constrained scaling for 'Cylinder' meshes

#### Other uses for mesh scale

There are a number of interesting uses for the mesh offset property.

- `Class.DataModelMesh.Offset` and Scale can be animated using
  `Class.TweenService` relatively inexpensively as the engine does not
  need to make any physics/collision calculations as the `Class.BasePart`
  is not changed.
- Changing the relationship between the mesh and its collision extents
  (determined by the `Class.BasePart`)


DataModelMesh.Scale

The Scale of a mesh determines the size of the mesh relative to its
original dimensions.


**VertexColor** determines the hue change of the
`Class.FileMesh.TextureId|Texture` of a `Class.FileMesh`. Note that this
property is a `Datatype.Vector3` rather than a `Datatype.Color3`; to
convert, use the `Datatype.Color3.R`, `Datatype.Color3.G`, and
`Datatype.Color3.B` properties.

Although this property allows basic modification of a texture, changing a
texture entirely provides more control. See `Class.MeshPart` for more
details.


DataModelMesh.VertexColor

Changes the hue of a mesh's texture, used with `Class.FileMesh.TextureId`.


The DataModelMesh is an abstract class from which mesh classes descend.


`Instance` is the base class for all classes in the Roblox class hierarchy
which can be part of the `Class.DataModel` tree.

It is not possible to directly create root `Instance` objects, but the special
`Datatype.Instance.new()` constructor creates objects via code, taking the
name of the class as a parameter and returning the created object.


Demonstrates detecting changes to an instance's ancestry by connecting to the
`Class.Instance.AncestryChanged` event.

The ChangingPart's Parent is set to different values overtime. The parent of
the part is the part's ancestor, so the `Class.Instance.AncestryChanged` event
will fire whenever it changes.


Fires when this instance is reparented or when any of its ancestors is
reparented.

You can use this event to track the deletion of an instance in Studio,
such as manual deletion in the Explorer or through a plugin. If you need
to detect when an instance is destroyed using `Class.Instance:Destroy()`,
use the `Class.Instance.Destroying` event instead.


Instance.AncestryChanged

child

The instance whose `Class.Instance.Parent|Parent` property changed,
which can be this instance or a more distant ancestor, **not**
necessarily the instance the handler is connected to.


parent

The new parent of the `child` parameter.


Fires when the `Class.Instance.Parent` property of this object or one of
its ancestors is changed.


This event fires whenever any attribute is changed on the instance,
including when an attribute is set to `nil`. The name of the changed
attribute is passed to the connected function.

For example, the following code snippet connects the `attributeChanged()`
function to fire whenever one of the part's attributes changes:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part

local function attributeChanged(attributeName)
	print(attributeName, "changed")
end

part.AttributeChanged:Connect(attributeChanged)
```

See also `Class.Instance:GetAttributeChangedSignal()` which returns an
event that fires when a specific given attribute changes.


Instance.AttributeChanged

attribute

The name of the attribute that has been changed.


Fires whenever an attribute is changed on the `Class.Instance`.


This snippet prints the names of objects as they are added to the Workspace:


Fires after an object is parented to this `Class.Instance`.

Note, when using this method on a client to detect objects created by the
server it is necessary to use `Class.Instance:WaitForChild()` when
indexing these object's descendants. This is because the object and its
descendants are not guaranteed to replicate from the server to the client
simultaneously. For example:

```
local Workspace = game:GetService("Workspace")

Workspace.ChildAdded:Connect(function(child)
	-- Use WaitForChild() since descendants may not have replicated yet
	local head = child:WaitForChild("Head")
end)
```

Note, this event only operates for immediate children of the
`Class.Instance`. For an event that captures all descendants, use
`Class.Instance.DescendantAdded`.

See also `Class.Instance.ChildRemoved`.


Instance.ChildAdded

The `Class.Instance` that has been added.


Fires after an object is parented to this `Class.Instance`.


Instance.childAdded

This snippet prints the names of objects as they are removed from the
Workspace:


Fires after a child is removed from this `Class.Instance`.

Removed refers to when an object's parent is changed from this
`Class.Instance` to something other than this `Class.Instance`. Note, this
event will also fire when a child is destroyed (using
`Class.Instance:Destroy()`) as the destroy function sets an object's
parent to `nil`.

This event only operates for immediate children of the `Class.Instance`.
For an event that captures all descendants, use
`Class.Instance.DescendantRemoving`.

See also `Class.Instance.ChildAdded`.


Instance.ChildRemoved

The `Class.Instance` that has been removed.


Fires after a child is removed from this `Class.Instance`.


This following example will print the name of any object that is added to the
Workspace:


This event fires after a descendant is added to the `Class.Instance`.

As it fires for every descendant, parenting an object to the
`Class.Instance` will fire the event for this object and all of its
descendants individually.

If you're only concerned with the **direct children** of the
`Class.Instance`, use `Class.Instance.ChildAdded` instead.

See also `Class.Instance.DescendantRemoving`.


Instance.DescendantAdded

descendant

Fires after a descendant is added to the `Class.Instance`.


The following example prints the name of any descendant as it is being removed
from the Workspace:


This event fires **immediately before** the parent `Class.Instance`
changes such that a **descendant** instance will no longer be a
descendant. `Class.Instance:Destroy()|Destroy()` changes an instance's
`Class.Instance.Parent|Parent` to `nil`, so calling that method on a
descendant of the parent will cause this event to fire.

Since this event fires **before** the descendant's removal, the parent of
the descendant will be unchanged at the time of this event firing. If the
descendant is also a **direct child** of the parent, this event will fire
before `Class.Instance.ChildRemoved`.

If a descendant has children, this event fires with the descendant first,
followed by its descendants.

#### Warning

This event fires with the descendant object that is being removed.
Attempting to set the `Class.Instance.Parent|Parent` of the descendant to
something else will fail. Below is an example that demonstrates this:

```
local Workspace = game:GetService("Workspace")

Workspace.DescendantRemoving:Connect(function(descendant)
	-- Do not manipulate the parent of the descendant in this function!
	-- This event fires BECAUSE the parent was manipulated, and the change hasn't happened yet
	-- Therefore, it is problematic to change the parent like this:
	descendant.Parent = game
end)

local part = Instance.new("Part")
part.Parent = Workspace
part.Parent = nil
```

See also `Class.Instance.DescendantAdded|DescendantAdded`.


Instance.DescendantRemoving

The `Class.Instance` that is being removed.


Fires immediately before a descendant of the `Class.Instance` is removed.


This sample demonstrates how, when using Immediate signal behavior, an
Instance being destroyed remains in place until the connected function yields.


This sample demonstrates how, when using Deferred signal behavior, an Instance
is destroyed before the signal fires.


The `Class.Instance` will never be deleted from memory while a connected
function is still using it. However, if the function yields at any point,
the `Class.Instance` and its descendants will be parented to `nil`.

If the `Class.Workspace.SignalBehavior` property is set to
`Enum.SignalBehavior.Immediate`, this event fires immediately before the
`Class.Instance` or one of its ancestors is destroyed with
`Class.Instance:Destroy()`.

If the `Class.Workspace.SignalBehavior` property is set to
`Enum.SignalBehavior.Deferred`, this event fires at the next resumption
point, which will be after the `Class.Instance` or one of its ancestors is
destroyed with `Class.Instance:Destroy()`.

With `Enum.SignalBehavior.Deferred|Deferred` behavior, connecting a script
to its own `Class.Instance.Destroying` event is problematic, as the script
will be destroyed before the callback can be called (meaning it will not
execute).

When deleting an `Class.Instance` in Studio, such as manually deleting
through the [Explorer](/studio/explorer) or through a plugin,
the `Class.Instance` isn't destroyed. Instead, the parent is set to `nil`
which you can track with `Class.Instance.AncestryChanged`.


Instance.Destroying

Fires immediately before (or is deferred until after) the instance is
destroyed via `Class.Instance:Destroy()`.


This event fires whenever any style property is changed on the instance,
including when a property is set to `nil`.

```lua
local Players = game:GetService("Players")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")
local meterBar = HUDContainer.MeterBar

local function stylePropertyChanged()
	print("Styled properties changed")
end

meterBar:StyledPropertiesChanged():Connect(stylePropertyChanged)
```


Instance.StyledPropertiesChanged

Fires whenever any style property is changed on the instance, including
when a property is set to `nil`.


This method applies a tag to the instance, with no effect if the tag is
already applied. Successfully adding a tag will fire a signal created by
`Class.CollectionService:GetInstanceAddedSignal()` with the given tag.

#### Warnings

- An instance's tags that were added client-side will be dropped if the
  server later adds or removes a tag on that instance because the server
  replicates all tags together and overwrites previous tags.

- When tagging an instance, it is common that some resources are used to
  give the tag its functionality, for example event connections or tables.
  To prevent memory leaks, it's a good idea to clean these up (disconnect,
  set to `nil`, etc.) when no longer needed for a tag. Do this when
  calling `Class.Instance:RemoveTag()`, calling
  `Class.Instance:Destroy()`, or in a function connected to a signal
  returned by `Class.CollectionService:GetInstanceRemovedSignal()`.


Instance:AddTag

The children function returns an array of the object's children.


Instance:children

Returns an array of the object's children.


This method destroys all of an instance's children and descendants.

```
local part = Instance.new("Part")

-- Add some sparkles
for i = 1, 3 do
	local sparkles = Instance.new("Sparkles")
	sparkles.Parent = part

  local sc = Instance.new("Sparkles")
  sc.Parent = sparkles
end

print("Children:", #part:GetChildren())  --> Children: 3

part:ClearAllChildren()

print("Children:", #part:GetChildren())  --> Children: 0
```

If you do not wish to destroy **all** children and descendants, use either
`Class.Instance:GetChildren()` or `Class.Instance:GetDescendants()` to
loop through those children/descendants and select what to destroy. For
example, the following code sample will destroy all
`Class.BasePart|BaseParts` descending from a `Class.Model`:

```
local Workspace = game:GetService("Workspace")

local model = Workspace:FindFirstChild("TestModel")

for _, descendant in model:GetDescendants() do
	if descendant:IsA("BasePart") then
		descendant:Destroy()
	end
end
```


Instance:ClearAllChildren

This method destroys all of an instance's children.


Demonstrates cloning a model using `Class.Instance:Clone()`.


`Clone()` creates a copy of an instance and all of its descendants,
ignoring all instances that are not
`Class.Instance.Archivable|Archivable`. The copy of the root instance is
returned by this method and its `Class.Instance.Parent|Parent` is set to
`nil`. Note that if the instance itself has
`Class.Instance.Archivable|Archivable` set to `false`, this method will
return `nil`.

If a reference property such as `Class.ObjectValue.Value` is set in a
cloned instance, the value of the copy's property depends on the
original's value:

- If a reference property refers to an instance that was **also** cloned,
  the copy will refer to the copy.
- If a reference property refers to an instance that was **not** cloned,
  the same value is maintained in the copy.


Instance:Clone

Create a copy of an instance and all its descendants, ignoring instances
that are not `Class.Instance.Archivable|Archivable`.


Instance:clone

Demonstrates destroying a Part using the `Class.Instance:Destroy()` function.

This function is the correct way to dispose of objects that are no longer
required.


Sets the `Class.Instance.Parent` property to `nil`, locks the
`Class.Instance.Parent` property, disconnects all connections, and calls
`Destroy()` on all children. This method is the correct way to dispose of
objects that are no longer required.

Disposing of unneeded objects is important, since unnecessary objects and
connections in a place use up memory which can lead to serious performance
issues over time.

As a best practice after calling `Destroy()` on an object, set any
variables referencing the object (or its descendants) to `nil`. This
prevents your code from accessing anything to do with the object.

```lua
local part = Instance.new("Part")
part.Name = "Hello, world"
part:Destroy()
-- Don't do this:
print(part.Name)  --> "Hello, world"
-- Do this to prevent the above line from working:
part = nil
```

Once an `Class.Instance` has been destroyed by this method, it cannot be
reused because the `Class.Instance.Parent` property is locked. To
**temporarily** remove an object instead of destroying it, set
`Class.Instance.Parent|Parent` to `nil`. For example:

```
local Workspace = game:GetService("Workspace")

object.Parent = nil
task.wait(2)
object.Parent = Workspace
```

To destroy an object after a set amount of time, use
`Class.Debris:AddItem()`.


Instance:Destroy

Sets the `Class.Instance.Parent` property to `nil`, locks the
`Class.Instance.Parent` property, disconnects all connections, and calls
`Destroy()` on all children.


Instance:destroy

Returns the first ancestor of the `Class.Instance` whose
`Class.Instance.Name` is equal to the given name.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

The following code snippet would find the first ancestor of the object
named `Car`.

```
local car = object:FindFirstAncestor("Car")
```

For variants of this method that find ancestors of a specific class,
please see `Class.Instance:FindFirstAncestorOfClass()` and
`Class.Instance:FindFirstAncestorWhichIsA()`.


Instance:FindFirstAncestor

name

The `Class.Instance.Name` to be looked for.


Returns the first ancestor of the `Class.Instance` whose
`Class.Instance.Name` is equal to the given name.


Returns the first ancestor of the `Class.Instance` whose
`Class.Object.ClassName` is equal to the given className.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

A common use of this method is finding the `Class.Model` a
`Class.BasePart` belongs to. For example:

```
local model = part:FindFirstAncestorOfClass("Model")
```

This method is a variant of `Class.Instance:FindFirstAncestor()` which
checks the `Class.Object.ClassName` property rather than
`Class.Instance.Name`. `Class.Instance:FindFirstAncestorWhichIsA()` also
exists, using the `Class.Object:IsA()` method instead to respect class
inheritance.


Instance:FindFirstAncestorOfClass

className

The `Class.Object.ClassName` to be looked for.


Returns the first ancestor of the `Class.Instance` whose
`Class.Object.ClassName` is equal to the given className.


Returns the first ancestor of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.

This method works upwards, meaning it starts at the instance's immediate
`Class.Instance.Parent` and works up towards the `Class.DataModel`. If no
matching ancestor is found, it returns `nil`.

Unlike `Class.Instance:FindFirstAncestorOfClass()`, this method uses
`Class.Object:IsA()` which respects class inheritance. For example:

```
print(part:IsA("Part"))  --> true
print(part:IsA("BasePart"))  --> true
print(part:IsA("Instance"))  --> true
```

Therefore, the following code sample will return the first
`Class.BasePart` ancestor, regardless of if it is a `Class.WedgePart`,
`Class.MeshPart` or `Class.Part`.

```
local part = object:FindFirstAncestorWhichIsA("BasePart")
```

See also `Class.Instance:FindFirstAncestor()`.


Instance:FindFirstAncestorWhichIsA

Returns the first ancestor of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.


The below would look in Workspace for an object name "Brick". If found, it
will change the name of the object to "Foo".


Returns the first child of the `Class.Instance` with the given name, or
`nil` if no such child exists. If the optional `recursive` argument is
`true`, this method searches all descendants rather than only the
immediate children of the `Class.Instance`.

#### Checking the Existence of an Object

`FindFirstChild()` is necessary if you need to verify an object exists
before continuing. Attempting to index a child by name using the dot
operator throws an error if the child doesn't exist.

```lua
local Workspace = game:GetService("Workspace")

-- The following line errors if the part doesn't exist in the workspace
Workspace.Part.Transparency = 0.5
```

A better approach is to use `FindFirstChild()` to first check for `Part`,
then use an `if` statement to run code that needs it.

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace:FindFirstChild("Part")
if part then
	part.Transparency = 0.5
end
```

#### Finding a Child Whose Name Matches a Property

Sometimes the `Class.Instance.Name|Name` of an object is the same as that
of a property of its `Class.Instance.Parent|Parent`. When using the dot
operator, properties take precedence over children if they share a name.

In the following example, a `Class.Folder` called `Color` is added to a
`Class.Part`, which also has the `Class.Part.Color` property. Notice that
`part.Color` refers to the `Datatype.Color3` property value, not the child
`Class.Folder` instance. A benefit of using
`Class.Instance:FindFirstChild()|FindFirstChild()` is that the
introduction of new properties does not impose a risk on your code.

```lua
local part = Instance.new("Part")
local folder = Instance.new("Folder")
folder.Name = "Color"
folder.Parent = part
local c1 = part.Color  -- The property
local c2 = part:FindFirstChild("Color")  -- The child folder
```

#### Performance Notes

`Class.Instance:FindFirstChild()|FindFirstChild()` takes about 20% longer
than using the dot operator and almost 8 times longer than simply storing
a reference to an object. Therefore, you should avoid calling it in
performance-dependent code such as in tight loops or functions connected
to `Class.RunService.Heartbeat` and `Class.RunService.PreRender`. Instead,
store the result in a variable, or consider using
`Class.Instance.ChildAdded|ChildAdded` or
`Class.Instance:WaitForChild()|WaitForChild()` to detect when a child of a
given name becomes available.


Instance:FindFirstChild

The `Class.Instance.Name` to be searched for.


recursive

Whether or not the search should be conducted recursively.


Returns the first child of the `Class.Instance` found with the given name.


Instance:findFirstChild

Returns the first child of the `Class.Instance` whose
`Class.Object.ClassName|ClassName` is equal to the given `className`.
Unlike `Class.Instance:FindFirstChildWhichIsA()`, this method only returns
objects whose class matches `className`, ignoring class inheritance. If no
matching child is found, this method returns `nil`.


Instance:FindFirstChildOfClass

Returns the first child of the `Class.Instance` whose
`Class.Object.ClassName|ClassName` is equal to the given class name.


Returns the first child of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.

If no matching child is found, this method returns `nil`. If the optional
recursive argument is true, this method searches all descendants rather
than only the immediate children of the `Class.Instance`.

Unlike `Class.Instance:FindFirstChildOfClass()`, this method uses
`Class.Object:IsA()` which respects class inheritance. For example:

```lua
print(part:IsA("Part")) --> true
print(part:IsA("BasePart")) --> true
print(part:IsA("Instance")) --> true
```

Therefore, the following code sample will return the first
`Class.BasePart` child, regardless of if it is a `Class.WedgePart`,
`Class.MeshPart` or `Class.Part`.

```
local part = object:FindFirstChildWhichIsA("BasePart")
```

Developers looking for a child by name, should use
`Class.Instance:FindFirstChild()` instead.


Instance:FindFirstChildWhichIsA

The `Class.Object.ClassName` to be searched for.


Returns the first child of the `Class.Instance` for whom
`Class.Object:IsA()` returns true for the given className.


Returns the first descendant found with the given `Class.Instance.Name`.

This method is disabled and cannot be used. To find the first descendant
of an instance, consider using the `recursive` parameter on
`Class.Instance:FindFirstChild()` instead.


Instance:FindFirstDescendant

The `Class.Instance.Name` to search for.


Returns the first descendant found with the given `Class.Instance.Name`.


If the `Class.Instance` is an `Class.Actor`, the `Class.Actor` itself is
returned. Otherwise, its closest ancestor `Class.Actor` is returned. If no
ancestor is an `Class.Actor`, the result is `nil`.


Instance:GetActor

Returns the `Class.Actor` associated with the Instance, if any.


This method returns the value which has been assigned to the given
attribute name. If no attribute has been assigned, `nil` is returned.

For example, the following code snippet sets and then gets the value of
the instance's `InitialPosition` attribute:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)

local initialPosition = instance:GetAttribute("InitialPosition")
print(initialPosition)
```

#### See Also

- `Class.Instance:SetAttribute()` which sets the attribute with the given
  name to the given value.
- `Class.Instance:GetAttributes()` which returns a dictionary of key‑value
  pairs for each of the instance's attributes.


Instance:GetAttribute

The name of the attribute being retrieved.


The value which has been assigned to the given attribute name. If no
attribute has been assigned, `nil` is returned.


Returns the value which has been assigned to the given attribute name.


This method returns an event that behaves exactly like the
`Class.Object.Changed|Changed` event, except that it only fires when the
specific given attribute changes; effectively it is similar to
`Class.Object:GetPropertyChangedSignal()|GetPropertyChangedSignal()` but
for attributes.

It's generally a good idea to use this method instead of a connection to
`Class.Object.Changed|Changed` with a function that checks the attribute
name. Subsequent calls to this method on the same object with the same
attribute name return the same event.

The following code example returns a signal that fires the function
`attributeChanged()` when the part's `InitialPosition` attribute changes:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)

local function attributeChanged()
	print("Attribute changed")
end

part:GetAttributeChangedSignal("InitialPosition"):Connect(attributeChanged)
```

See also `Class.Instance.AttributeChanged` which fires whenever any
attribute is changed on the instance.


Instance:GetAttributeChangedSignal

The name of the specified attribute for which the change signal is
being returned.


An event that fires when the given attribute changes.


Returns an event that fires when the given attribute changes.


This method returns a dictionary of key‑value pairs for each attribute
where the key is the attribute's name and the value is a non‑`nil` value.

For example, the following code snippet outputs an instance's attributes
and values:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", part.Position)
part:SetAttribute("CanUse", true)

for name, value in part:GetAttributes() do
	print(name .. " = " .. value)
end
```

See also `Class.Instance:GetAttribute()` which returns the value that has
been assigned to the given attribute name.


Instance:GetAttributes

A dictionary of string → variant pairs for each attribute where the
string is the name of the attribute and the variant is a non-nil
value.


Returns a dictionary of the instance's attributes.


The below would print the name of all objects currently in Workspace when ran.


Returns an array (a numerically indexed table) containing all of the
instance's direct children, or every `Class.Instance` whose
`Class.Instance.Parent|Parent` is equal to the object. The array can be
iterated upon using either a numeric or generic `for` loop:

```lua
local Workspace = game:GetService("Workspace")

-- Numeric loop example
local children = Workspace:GetChildren()
for i = 1, #children do
	local child = children[i]
	print(child.Name .. " is child number " .. i)
end
```

```lua
local Workspace = game:GetService("Workspace")

-- Generic loop example
local children = Workspace:GetChildren()
for i, child in children do
	print(child.Name .. " is child number " .. i)
end
```

Note that the returned array is **not** sorted in any particular order, so
manual sorting (for example using `Library.table.sort()`) is advised for
sorting the children returned by this method.

See also the `Class.Instance:GetDescendants()|GetDescendants()` method.


Instance:GetChildren

An array containing the instance's children.


Returns an array containing all of the instance's children.


Instance:getChildren

Returns a coded string of the debug ID used internally by Roblox. Note
that:

- This item is protected. Attempting to use it in a `Class.Script` or
  `Class.LocalScript` will cause an error.
- A debug ID is an ID used in debugging processes. It allows a debugger to
  read each instruction before an application processes it. All objects in
  Roblox act like processes and each run instructions (or 'code') that can
  be debugged if needed.
- This can be helpful for plugins which need to distinguish similar
  objects from one-another (such as objects that share the same name).


Instance:GetDebugId

scopeLength

Returns a coded string of the debug ID used internally by Roblox.


GetDescendants is often used to do something to all the descendants that are a
particular type of object. The code in this example uses GetDescendants and
`Class.Instance:IsA()` to find all of the parts in the workspace and turns
them green.


This object method returns an array that contains all of the descendants
of that object. Unlike `Class.Instance:GetChildren()`, which only returns
the immediate children of an object, this method finds every child of the
object, every child of those children, and so on.

Note that the returned array is **not** sorted in any particular order, so
manual sorting (for example using `Library.table.sort()`) is advised for
sorting the descendants returned by this method. Also consdier the
`Class.Instance:QueryDescendants()|QueryDescendants()` method to query
descendants by a combination of selectors and combinators.


Instance:GetDescendants

An array containing the instance's descendants.


Returns an array containing all of the descendants of the instance.


This code sample demonstrates the behavior of `Class.Instance:GetFullName()`.
It shows how the function behaves when called on an object not in the
`DataModel` hierarchy, and it also shows how the return value does not escape
special characters.


This code sample re-implements the `Class.Instance:GetFullName()` function in
Lua.


Returns a string describing the instance's ancestry. The string is a
concatenation of the `Class.Instance.Name|Name` of the object and its
ancestors, separated by periods. The `Class.DataModel` (`game`) is not
considered. For example, a `Class.Part` in the `Class.Workspace` may
return `Class.Workspace.Part`.

When called on an `Class.Instance` that is not a descendant of the
`Class.DataModel`, this method considers all ancestors up to and including
the topmost one without a `Class.Instance.Parent|Parent`.

This method is useful for logging and debugging. You shouldn't attempt to
parse the returned string for any useful operation; this method does not
escape periods (or any other symbol) in object names. In other words,
although its output often appears to be a valid Luau identifier, it is not
guaranteed.


Instance:GetFullName

Returns a string describing the instance's ancestry.


This method returns the styled or explicitly modified value of the
specified property, or else the default property value if it hasn't been
styled/modified. This differs slightly from accessing the property value
directly, such as `[GuiObject].Rotation`, which returns the default or
modified value of the property.

```lua
local Players = game:GetService("Players")
local ReplicatedStorage = game:GetService("ReplicatedStorage")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")

local coreSheet = ReplicatedStorage:FindFirstChild("CoreSheet")
local rule = coreSheet:FindFirstChildWhichIsA("StyleRule")
rule.Selector = "TextButton"

-- Reference to a button
local button = HUDContainer:FindFirstChildWhichIsA("TextButton")

print(button:GetStyled("Rotation")) --> 0 (default value)
print(button.Rotation) --> 0 (default value)

-- Apply rotation through style rule property
rule:SetProperty("Rotation", 30)

print(button:GetStyled("Rotation")) --> 30 (styled value based on rule)
print(button.Rotation) --> 0 (default value)

-- Explicitly modify/override styled property
button.Rotation = 45

print(button:GetStyled("Rotation")) --> 45 (modified value)
print(button.Rotation) --> 45 (modified value)
```


Instance:GetStyled

selector

Optional selector for the pseudo instance you are targeting on the
instance.


The styled or explicitly modified value of the specified property, or
else the default property value if it hasn't been styled/modified.


Returns the styled or explicitly modified value of the specified property,
or else the default property value if it hasn't been styled/modified.


This method returns an event that behaves exactly like the
`Class.Instance.StyledPropertiesChanged|StyledPropertiesChanged` event,
except that it only fires when the given style property changes. It's
generally a good idea to use this method instead of a connection to
`Class.Instance.StyledPropertiesChanged|StyledPropertiesChanged` with a
function that checks the property name. Subsequent calls to this method on
the same object with the same property name return the same event.

Note that this event will not pass any arguments to a connected function,
so the value of the changed property must be read directly within a
script.

```lua
local Players = game:GetService("Players")

local player = Players.LocalPlayer
local playerGui = player.PlayerGui
local HUDContainer = playerGui:WaitForChild("HUDContainer")
local meterBar = HUDContainer.MeterBar

local function stylePropertyChanged()
	print("Style property changed!")
end

meterBar:GetStyledPropertyChangedSignal("AnchorPoint"):Connect(stylePropertyChanged)
```


Instance:GetStyledPropertyChangedSignal

property

Name of the style property for which to listen for changes.


Event that fires when the given style property changes.


This method returns an array of the tags applied to the given instance, as
strings. You can add tags either in Studio in the
[Properties](/studio/properties) window or at runtime with
`Class.Instance:AddTag()|AddTag()`.

This method is useful when you want to do something with multiple tags on
an instance at once. However, it is inefficient to use this method to
check for the existence of a single tag; instead, use
`Class.Instance:HasTag()|HasTag()` to check for a specific tag.


Instance:GetTags

Gets an array of all tags applied to the instance.


This method returns `true` if the provided tag has been added to the
object. You can add tags either in Studio in the
[Properties](/studio/properties) window or at runtime with
`Class.Instance:AddTag()|AddTag()`.


Instance:HasTag

Check whether the instance has a given tag.


Demonstrates determining if one instance is the ancestor of another using
`Class.Instance:IsAncestorOf()`

Workspace and SpawnLocation are ancestors of the SpawnLocation's decal.
Workspace is an ancestor of SpawnLocation.

SpawnLocation and its decal are descendants of Workspace, not ancenstors.
Decal is a descendant to SpawnLocation, not an ancestor.


Returns true if an `Class.Instance` is an ancestor of the given
descendant.

An `Class.Instance` is considered the ancestor of an object if the
object's `Class.Instance.Parent` or one of it's parent's
`Class.Instance.Parent` is set to the `Class.Instance`.

See also, `Class.Instance:IsDescendantOf()`.


Instance:IsAncestorOf

True if the `Class.Instance` is an ancestor of the given descendant.


Returns true if an `Class.Instance` is an ancestor of the given
descendant.


Returns `true` if an `Class.Instance` is a descendant of the given
ancestor.

Note that `IsDescendantOf()` cannot be used with a parameter of `nil` to
check if an object has been removed.

See also `Class.Instance:IsAncestorOf()`.


Instance:IsDescendantOf

ancestor

True if the `Class.Instance` is a descendant of the given ancestor.


Returns `true` if an `Class.Instance` is a descendant of the given
ancestor.


Instance:isDescendantOf

This method indicates whether a specific property has been modified from
the code‑instantiated default. If called on an instance newly created via
code (`Datatype.Instance.new()`), this method will return `false`. If
called on an object newly created by Studio workflows such as
[Explorer](/studio/explorer) window insertion, the result may
differ.

For example, querying the
`Class.TextLabel.BackgroundColor3|BackgroundColor3` property of a
`Class.TextLabel` inserted via the [Explorer](/studio/explorer)
will return `true`, but querying the same property of a `Class.TextLabel`
created through `Datatype.Instance.new()` will return `false`, assuming no
other changes were made to its
`Class.TextLabel.BackgroundColor3|BackgroundColor3`.

Note that this method only returns useful results for services and
user‑creatable instances. Return values for system‑populated properties of
instances like `Class.PackageLink` is undefined behavior.

Also note that if this method returns `true`, styling will **not** affect
the property because explicitly modifying a property takes precedence over
styling it. To reset a property to its code‑instantiated default and allow
styling on it, use
`Class.Instance:ResetPropertyToDefault()|ResetPropertyToDefault()`.


Instance:IsPropertyModified

Boolean indicating whether the property is modified from its
code‑instantiated default.


Returns `true` if the value stored in the specified property is not equal
to the code-instantiated default.


This object method returns an array that contains all descendants of the
object that match the provided `selector` string. `selector` can include
multiple selectors and combinators to match characteristics such as the
class name, instance name, and hierarchy relationships, as well as
specific values of instance properties and attributes. The `selector`
grammar is similar to the one used in `Class.StyleRule`, with only a few
differences regarding which parts of the grammar are supported or not.

#### Selectors

- `ClassName` — Matches instances of the specified class in a
  `Class.Object:IsA()` relationship.
- `.Tag` — Matches instances tagged with a `Class.CollectionService` tag.
- `#Name` — Matches instances of a specific `Class.Instance.Name`.
- `[property = value]` — Matches instances which have the specified
  property and that property has the specified value. Boolean, number, and
  string values are supported. Letters, numbers, `_`, and `-` can be used
  without putting the value in quotation marks.
- `[$attribute]` — Matches instances which have the specified
  [attribute](/studio/properties#instance-attributes) set.
- `[$attribute = value]` — Matches instances which have the specified
  attribute **and** that attribute has the specified value. Same
  limitations apply as for property selectors. If you want to check for
  the absence of an attribute, do not query it as `nil`; instead use the
  `:not` pseudo‑class as in `:not([$attribute])`.

Selectors can also be combined. For example,
`Model.Apple[$Variety = Fuji][$Flavor = 4]` will match instances which are
a `Class.Model` tagged as `Apple` and which have a `Variety` attribute
equal to `Fuji` as well as a `Flavor` attribute equal to `4`.

```lua
local Workspace = game:GetService("Workspace")

-- Get all MeshPart descendants
print(Workspace:QueryDescendants("MeshPart"))

-- Get all descendants tagged as "Fruit"
print(Workspace:QueryDescendants(".Fruit"))

-- Get all descendants with the name "RedTree"
print(Workspace:QueryDescendants("#RedTree"))

-- Get all descendants with CanCollide property set to false
print(Workspace:QueryDescendants("[CanCollide = false]"))

-- Get all descendants with a "FuelCapacity" attribute assigned
print(Workspace:QueryDescendants("[$FuelCapacity]"))
-- Get all descendants with a "FuelCapacity" attribute set to 75
print(Workspace:QueryDescendants("[$FuelCapacity = 75]"))
```

#### Combinators

Combinators let you mix basic selectors to match deeper hierarchy
relationships.

- `>` — Matches instances that are **direct children** of the previous
  filter matches.

- `>>` — Matches instances that are **descendants** of the previous filter
  matches. This is the default first filter, meaning that `SpotLight.Red`
  is the same as `>> SpotLight.Red`.

- `,` — Specifies a list of multiple independent selectors for the
  descendant query. Only elements matching the filter are placed in the
  returned array; `nil` will not be included for non‑matches in a query
  list.

```lua
local Workspace = game:GetService("Workspace")

-- Get direct children of any Model that are tagged as "SwordPart"
print(Workspace:QueryDescendants("Model > .SwordPart"))

-- Get direct children which are a Part and are tagged as "Apple"
print(Workspace:QueryDescendants("> Part.Apple"))

-- Get descendants of any Model with an attribute "OnFire" set to true
print(Workspace:QueryDescendants("Model >> [$OnFire = true]"))

-- Get MeshPart descendants tagged as "SwordPart" OR with an attribute "OnFire" set to true
print(Workspace:QueryDescendants("MeshPart.SwordPart, MeshPart[$OnFire = true]"))
```

#### Pseudo-class selectors

- `:not(complex-selector-list)` — Allows selecting instances which do
  **not** match any of the selectors inside, effectively performing a
  negation of the selectors. Since the expression inside is a list of
  complex selectors, it's possible to filter based on multiple conditions.

- `:has(relative-selector-list)` — Allows selecting instances based on
  which instances they contain inside. The selector list is evaluated
  relative to each instance.

```lua
local Workspace = game:GetService("Workspace")

-- Get all descendants which are NOT of class SpotLight
print(Workspace:QueryDescendants(":not(SpotLight)"))
-- Get all descendants which are NOT of class SpotLight OR PointLight
print(Workspace:QueryDescendants(":not(SpotLight, PointLight)"))
-- Get all descendants which do NOT have an attribute "OnFire"
print(Workspace:QueryDescendants(":not([$OnFire])"))
-- Get all descendants EXCEPT children of a Model tagged as "SwordPart"
print(Workspace:QueryDescendants(":not(Model > .SwordPart)"))

-- Get descendants which contain a Tool instance as their own descendant
print(Workspace:QueryDescendants(":has(Tool)"))
-- Get MeshPart descendants which contain a direct child tagged as "SwordPart"
print(Workspace:QueryDescendants("MeshPart:has(> .SwordPart)"))

-- Get MeshPart descendants with direct children NOT of SurfaceAppearance or Texture class
print(Workspace:QueryDescendants("MeshPart:has(> :not(SurfaceAppearance, Texture))"))
```


Instance:QueryDescendants

Selector string used to filter elements.


An array of instances (empty if nothing matched the selector).


Returns an array containing all descendants of the instance that match the
`selector` string.


The following code demonstrates how a part can be re-added to the DataModel
after being removed:


This method sets the object's `Class.Instance.Parent` to `nil`, and does
the same for all its descendants.

If the object is referenced before being removed, it is possible to
retrieve the object at a later point.


Instance:Remove

Sets the object's `Parent` to `nil`, and does the same for all its
descendants.


Instance:remove

This method removes a tag from an instance. It will not throw an error if
the object does not have the tag. Successfully removing a tag will fire a
signal created by `Class.CollectionService:GetInstanceRemovedSignal()`
with the given tag.

Note that when tagging an instance, it's common that some resources are
used to give the tag its functionality, for example event connections or
tables. To prevent memory leaks, it's a good idea to clean these up
(disconnect, set to `nil`, etc.) when no longer needed for a tag.


Instance:RemoveTag

Resets a property to its default value. For example, calling
`ResetPropertyToDefault("Rotation")` on a `Class.TextLabel` is equivalent
to setting its `Class.TextLabel.Rotation|Rotation` to `0` (the property's
default value). This method can be used to ensure styling will override
this property's default value.


Instance:ResetPropertyToDefault

This method sets the attribute with the given name to the given value. If
the value given is `nil`, the attribute will be removed, since `nil` is
returned by default.

For example, the following code snippet sets the instance's
`InitialPosition` attribute to `Datatype.Vector3|Vector3.new(0, 10, 0)`:

```lua
local Workspace = game:GetService("Workspace")

local part = Workspace.Part
part:SetAttribute("InitialPosition", Vector3.new(0, 10, 0))
```

#### Limitations

Naming requirements and restrictions:

- Names must only use alphanumeric characters.
  - You may also include periods, hyphens, slashes, and underscores.
- No spaces or unique symbols (such as @, ~, !) are allowed.
- Strings must be 100 characters or less.
- Names are not allowed to start with **RBX** unless the caller is a
  Roblox core script (reserved for Roblox).

When attempting to set an attribute to an unsupported type, an error will
be thrown.

#### See Also

- `Class.Instance:GetAttribute()` which returns the value that has been
  assigned to the given attribute name.
- `Class.Instance:GetAttributes()` which returns a dictionary of key‑value
  pairs for each of the instance's attributes.


Instance:SetAttribute

value

The value to set the specified attribute to.


Sets the attribute with the given name to the given value.


Instance

`Instance` is the base class for all classes in the Roblox class hierarchy
which can be part of the `Class.DataModel` tree.


/reference/engine/classes/CylinderMesh.yaml